Image to STL converter for reliefs and lithophanes
Turn any PNG or JPG into a printable STL in seconds. Choose a raised relief or a backlit lithophane, set the size and thickness, and download a watertight model ready for your slicer.
Upload an image to see a live 3D preview of your STL.
How to convert an image to STL
- 01
Upload a picture
Logos, drawings and high-contrast photos work best. Everything stays in your browser.
- 02
Choose relief or lithophane
Set the width in millimetres, the base thickness and the relief height, and watch the 3D preview update.
- 03
Download and print
Download a watertight binary STL and slice it in Bambu Studio, PrusaSlicer, Cura or OrcaSlicer.
Two ways to turn an image into STL
A relief maps image brightness to height, so light areas rise and dark areas stay low — ideal for logos, name plates, coasters and wall art. A lithophane does the opposite: darker areas become thicker, so when you shine a light through a thin print in white filament, the original photo appears.
This converter builds a closed, printable solid with a flat base, so it slices cleanly. If you need a full 3D object instead of a flat relief — a figurine, a toy or a product — use our AI image to 3D generator and download the result as STL.
Lithophane from a photo
A lithophane is a thin print that shows a picture when light shines through it: dark areas are printed thicker and block more light, light areas are thinner. Choose Lithophane as the output type and the converter switches to that mapping for you, so you can turn an image into a lithophane STL in one step.
Choosing Lithophane fills in the starting values that work for most photos: a 0.8 mm base, 2.4 mm of relief (3.2 mm at the darkest point) and inverted brightness. Print it in white or natural PLA at 100% infill, so light passes through evenly, and turn on Smooth for portraits to hide pixel noise.
Your photo is converted in your browser and never uploaded, so family pictures stay on your device. For photo preparation, filament, lighting and stands, follow the full lithophane guide.
What each lithophane setting does
| Setting | Lithophane preset | What it controls |
|---|---|---|
| Width | 100 mm (80–150 mm works well) | The printed size. Smaller than about 60 mm loses detail in faces. |
| Base thickness | 0.8 mm | The thinnest, brightest areas. Thicker bases make the whole picture darker. |
| Relief height | 2.4 mm | Extra thickness for the darkest areas, which sets the contrast. |
| Detail | 180 grid samples | How finely the photo is sampled. Raise it for large prints; files get bigger. |
| Invert | On | Makes dark pixels thick. Must be on for a lithophane. |
| Smooth | On | Softens pixel noise that would print as bumps on faces and skies. |
The output is a watertight binary STL with a flat back. Print it standing upright or flat, with a 0.12–0.16 mm layer height.
Frequently asked questions
Is this image to STL converter free?
Yes. It runs entirely in your browser, needs no account and your image is never uploaded to a server.
What settings should I use for a lithophane?
Choose Lithophane and these values are filled in for you: a 0.8 mm base and 2.4 mm of relief (3.2 mm total) with inverted brightness. Print in white PLA at 100% infill with a fine layer height, and stand it in front of a light.
Why does my relief look noisy?
Photos contain fine texture that becomes bumps. Turn on Smooth, lower the detail setting, or start from a cleaner, higher-contrast image.
Can I make a full 3D model from an image instead?
Yes. A relief is flat by design. For a complete 3D object, use the AI image to 3D generator and download the model as STL.
Related tools
Ready to make your first 3D model?
Upload an image and see it in 3D in about two minutes.
Upload an image